Follow

How to: Use the Edge1 Vertical Offset Tool


There are two methods available for applying a vertical offset:

1. Automatically from the results screen on the accuracy check
2. Manually from the processing details screen

Automatic application of vertical offset

The suggested offset from the Accuracy Check can be automatically applied by simply tapping “Apply Offset” from the results screen on the Accuracy Check.

Picture1.png

Manual application of vertical offset

The vertical offset tool can also be opened at any time from the processing details screen. To apply an offset manually, the user enters the amount they would like to shift the point cloud. The units will match the units of the point cloud.

A positive value (e.g. 5 ft) will move the point cloud up from its current position. A negative value (e.g. -5 ft) will move the point cloud down from its current position.

 

Picture2.png

The screen will display the current offset along with the original offset. This is in case the user would like to revert to the original. To revert, enter the current offset with the opposite sign. The screen will indicate that the final offset will be 0.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk