What’s new!
- Terrain Following for LiDAR Mapping Missions (L1 & L2)
- UI/UX Improvements
- Hardening Items
New Features
LiDAR + Terrain Following
- Perform Terrain Following LiDAR mapping missions to ensure drone remains at a consistent altitude relative to the ground
- Supports both Zenmuse L1 & L2 LiDAR platforms
UI/UX Improvements
- Offline maps download
- Organization selector
- Mission pause functionality
- SkyPlan mission request information
Version List
Recommended Versions
| Aircraft | Remote Control | |
| Mavic 3 Enterprise | 10.01.00.17 | 02.01.05.07 |
| Matrice 300 + Smart Controller | 09.00.05.03 | 09.00.05.01 |
| Matrice 300 + RC Plus | 60.01.00.03 | 05.02.11.06 |
| Matrice 350 + RC Plus | 10.01.00.09 | 05.02.11.06 |
| Zenmuse P1 | Zenmuse L1 | Zenmuse L2 | Zenmuse H20/H20T | Zenmuse H20N | GL60 Zoom |
| 07.00.01.10 | 07.00.01.10 | 03.00.00.05 | 07.00.01.05 | 07.00.01.05 | 10 |
Known Limitations
-
Real Time Terrain Following (Mavic 3 Enterprise)
- If the drone flies over the home point when performing Real Time Terrain Following, the mission will mark complete even if it not yet complete
- Workaround: Select a home point outside the boundaries of the mapping mission
-
Closing SkyFlight Application During Battery Swap
- If the SkyFlight application is closed during a battery swap mid-mission, the photos & logs will be stored in two separate folders
- Workaround: Leave SkyFlight open and running during the entire mission
-
WiFi Connected Without Internet Connection
-
If SkyFlight is connected to a WiFi network that has no connection to the internet, it will increase loading times
- Note: Unstable network connections work fine
- Workaround: If WiFi network has no internet connection, disconnect from network
-
If SkyFlight is connected to a WiFi network that has no connection to the internet, it will increase loading times
For any questions or feedback, please contact product@skycatch.com
Comments